The refrigerator is one of the most hard-working appliances. It is running every minute of the day, especially in a busy house or restaurant with many starving people. KitchenAid refrigerator doesn’t need a lot of maintenance, but when it alarms or shows warnings on its display, it will need immediate attention. Replacing the water filter, clearing coils, or examining the door conditions can repair issues. There are some practical ways on how to reset the KitchenAid refrigerator control panel to make sure it continues to function properly.
We will provide you the solution for the KitchenAid refrigerator display error Code PO. The control panel of KitchenAid refrigerator shows error Code PO. If you press the ‘Confirm’ button that is on the display panel. The beeping of the fridge ceases, and the error code PO is reset and all should be fine. However, after some time, the KitchenAid refrigerator beeping again begins. Also, you observe that the lights on the drawer are not working. This problem occurs in many models of KitchenAid refrigerators. You are confused about why it is taking place and what can be the possible reasons and how to repair it. Now no worries as we have provided the possible causes and troubleshooting tips.
Before you start troubleshooting or changing the components of the refrigerator, try to reset the error by turning off the KitchenAid refrigerator for just ten minutes. It resets the control panel and fixes the problem. Once it fails to resolve the problem, then proceed to the given instruction.
The KitchenAid refrigerator displaying error code PO can be resolved by conducting the troubleshooting as provided here.
First, see to it that the unit is unplugged to prevent any electric accident and to safeguard the control panel from any damages while troubleshooting.
PO Error Code Fix
- Replace the Control Panel
- Replace the Power Supply Panel
They are the two major parts that cause the Error PO, thus we recommend you first try them and when found defective then change them.
Kindly note that it is possible that the pantry drawer is not closed in the KitchenAid refrigerator. Try to check and shut the panty drawer. Once the pantry drawer is shut, still there is no LED light illuminating, then it could be due to the UI. So you have to change the control panel for that part.
You have already reset or replaced the control board, still experiencing the issue of KitchenAid refrigerator beeping and displaying error code PO, then changing the power supply board may fix the issue.
If you press the ‘Confirm’ button, you notice that it runs for at least ten minutes or so, then you hear a ticking sound. Afterwhich, the KitchenAid refrigerator can be switched off and on again. The cycle will repeat non-stop. By replacing the control board or power supply panel can definitely help fix this problem.
For more details on the right ways on how to reset the Kitchenaid refrigerator control panel, talk to the experts of KitchenAid Appliance Repair Professionals. Also offers services for Kitchenaid cooktop repair and kitchenaid stove repair.